datos del producto

Dissipative Dual Layer ESD Worksurface

Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface.
NEW Abrasion Resistance Rubber Compound
Increased hardness2 (80 to 90 Type A) for greater resistance to abrasion, cuts, stretching and tearing. May be used in soldering applications with flux and other chemicals.
Dissipative (1 x 106 to <1 x 109 ohms Rtt) Top Layer
Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items.
Conductive (<1 x 106 Rtt) Bottom Layer - Limited Lifetime Warranty
Reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the material to be used with ESD workstation monitors.
Identifies ESD protective product for control & auditing purposes.
Lead-free RoHS compliant
Detail
ChemicalResistance
Type ESD Table Mat Part Number A510
Thickness 2MM Color Green Matte (green surface/black bottom conductive layer )
Compound Nitrile Rubber Customization Level C2 - Full Custom (Length, Width)
Product Density 1.4 Product Hardness ±60°
Wear Rate 0.02G/CM2 Bottom Resistance 10^3-10^5
Volume Resistance 10^6-10^9 Meter Resistor 10^6-10^9
Tensile Strength 3.6MPA Elongation at Break 1.88
Tear Strength 20.6KN/M Resilience 0.14
Static Discharge Time ≤0.01S Application Electronics Repair Desk Mat/the workbend surface/SMT Production Line
A510 ESD Table Mats is customized length,available 0.5-1.5M widths.

SKU                            SHORT DESCRIPTION                COLOR                                  THICKNESS             DIMENSIONS(L*W)                    STOCK PART         UOM


A510                            Nitrile Rubber                               Green                                       2MM                        1.0*10M                                        Yes                          RL
A510                            Nitrile Rubber                               Green                                       2MM                        1.2*10M                                        Yes                          RL

A510                            Nitrile Rubber                               Grey                                          3MM                        1.0*10M                                        Yes                          RL

A510                            Nitrile Rubber                               Grey                                          3MM                        1.2*10M                                        Yes                          RL


                          Key

                                   A = Performs well

                                   B = Slightly affected

                                   C = Moderately affected

                       

                                   D = Highly affected

                                   U = Not recommended

                                   NT = Not tested



ChemicalUrethaneNitrilePVCCFRSBRNatural Rubber
   Acetone   U   U   U   C   C   C
Animal FatsNTACUUU
Bleach Solution (10% Dilute)NTBBCCC
Boric AcidBAAAAA
Brake FluidUAAAAA
Brake Fluid (Silicone Based)UABCCC
Chlorine Solution (3% Dilute)CABCCC
Citric AcidNTACCCU
Cutting Fluid (Mineral Oil Based)UBBBCD
   Diesel Oil   U   A   B   U   U   U
Ethylene AcetateNTUNTUUU
Ethylene GlycolBAAAAA
Hydraulic Oil (Petroleum)UABDDD
Hydrochloric Acid Cole (37% Dilute)UCCBBB
Isopropyl AlcoholABABBA
Lacquer SolventsUUUUUU
Lindol (Hydraulic Fluid)NTUNTUUU
MEKUUUUUU
Mineral OilCABABU
NapthaNTCUUUU
NapthleneUUUUUU
PetroleumUCBDDD
Salt WaterAABBBC
ToluleneUUUUUU
Transmission Fluid (Type A)UBACUU
TrichloroethaneUUUUUU
Vegetable OilCABCCC








Office :86021-69600223
Sales Manager:+86-13761219161

Shanghai Aegir Industries  Co., Ltd. Address:No. 18, BinHon Road, Chengqiao Town Industrial Park , ChongMing District, Shanghai,China